GENERAL ASSEMBLY OF NORTH CAROLINA
SESSION 1999
SESSION LAW 2000-185
The General Assembly of North Carolina enacts:
Section 1. G.S. 7A-211.1 reads as rewritten:
"§ 7A-211.1. Actions to enforce motor vehicle mechanic and storage liens.
Notwithstanding the provisions of G.S. 7A-210(2) and 7A- 211,
the chief district judge may in his discretion, by specific order or general
rule, assign to any magistrate of his district actions to enforce motor vehicle
mechanic and storage liens arising under G.S. 44A-2(d) or 20-77(d) when the
claim arose in the county in which the magistrate resides. The defendant may be
subjected to the jurisdiction of the court over his person by the methods
provided in G.S. 7A-217 or 1A-1, Rule 4(j), Rules 4(j) and 4(j1), Rules
of Civil Procedure."
Section 2. G.S. 20-116(a) reads as rewritten:
"(a) The total outside
width of any vehicle or the load thereon shall not exceed 96 102 inches,
except as otherwise provided in this section. When hogsheads of tobacco are
being transported, a tolerance of six inches is allowed. When sheet or bale
tobacco is being transported the load must not exceed a width of 114 inches at
the top of the load and the bottom of the load at the truck bed must not exceed
the width of 102 inches inclusive of allowance for load shifting or settling. Special
mobile equipment is allowed a total outside width not to exceed 102
inches. Vehicles (other than passenger buses) that do not exceed the
overall width of 102 inches and otherwise provided in this section may be
operated in accordance with G.S. 20-115.1(c), (f), and (g)."
Section 3. The Joint Legislative Transportation Oversight Committee, with the assistance of the Department of Transportation, shall study the issue of motor vehicle lengths. The Committee shall examine both the issue of trailers of 53 feet in length and vehicles with a total overall length of 70 feet as a part of its study. The Department of Transportation is directed to assist the Committee in its study by developing data on the types and lengths of truck equipment sold and operated in the State. The Department shall report to the Committee by October 1, 2000. The Committee shall submit its final report on this issue, along with any recommended legislation, to the 2001 Regular Session of the General Assembly on or before January 15, 2001.
Section 4. This act is effective when it becomes law.
In the General Assembly read three times and ratified this the 12th day of July, 2000.
s/ Marc Basnight
President Pro Tempore of the Senate
s/ James B. Black
Speaker of the House of Representatives
s/ James B. Hunt, Jr.
Governor
Approved 10:18 a.m. this 2nd day of August, 2000